Sep 042015
 

Today we have a special treat from Sew Indie Month. Kati from Kate & Rose is here to show a tutorial on how she made this amazing folkswear inspired Olive that goes perfectly with her new Kinga skirt pattern. Kate & Rose patterns are folkwear inspired and she has several garment patterns along with many embroidery patterns. The patterns go well together and create a very cohesive look. Her style is incredible! You can check out all the Kate & Rose patterns here.

The Kinga skirt pattern is brand new and you can only get this pattern in the second huge bundle sale we have going on right now! Check out her amazing Kinga and Olive and then run over and buy your bundle! Remember 20% of proceeds go to Women for Women charity. Check out www.sewindependent.com for all the information. Without anymore delay, here she is with this great tutorial:

olive top with kinga skirt

The inspiration for the new Kinga skirt came from one of my favorite styles of Hungarian folk wear: from the North-Eastern part of Hungary, like the Cabbage Rose Fancy and Faraway Garden embroidery pattern sets. The most common outfit has a skirt with tons and tons of ribbons and flowers, and a fitted top with a pouf sleeve and a wide, colorful ribbon around the waist:

hungarian folk costume

(Source: Folk Costumes and Embroidery)

For this tutorial, I want to show you how to hack Lolita Patterns’ Olive blouse pattern to create a contemporary version of this look along with the Kinga skirt.

Ribbons are an obsession of Central European folk wear, you can even see it in contemporary fashion design like Lena Hoschek’s ribbon skirt. The Olive pattern has a great shape through which to combine the most important elements of both: princess seams, a sweet peplum, and a distinctive straight waistband piece which is perfect for displaying a wide floral ribbon. A lovely pattern all around.


RibbonZipperOlive4

To do this, I replaced the side zip with a front zipper opening, for which I used a metal separating zipper. Then, I covered the waistband with folkwear ribbon. I used a vintage ribbon I found in a thrift shop a couple years ago, but you can find beautiful folk art ribbons at M & J Trimmings or Etsy. The width of the ribbon is the same as the width of the waistband of the Olive. The separating zipper I chose is also in a contrasting color with my blouse fabric (I used a simple black cotton broadcloth), it matches the ribbon. The zipper is one of those stunning, way-too-expensive Riri zippers one gets seduced into buying when going to Pacific Trimmings. I got it cut to the exact length I needed, which I will tell you how to figure out.

1_ribbon_zipper

1. Pattern work

To create the front zip opening, we have to adjust the pattern pieces a tiny bit, then change the front facing to accommodate the zipper.

The front facing of the Olive is made of one piece and extends to the sleeves and side seams. This kind of facing supports the finished blouse across the shoulders and around the sleeves, is easy to finish and stays put nicely. All we need to do is re-create it as a two-piece facing, and extend it to the bottom of the blouse.

We’ll work with the front of the blouse from View B. I created a handy series of diagrams to walk you through the workflow – nothing very complicated.

FolksyOliveLolitaPatternsTutorial

We’ll need pattern pieces 6 (front facing), 8 (front waistband), 10 (front peplum), and 18 (front center bodice) (diagram 1). Cut the front waistband piece (8) and the front peplum piece (10) in half, as if they needed to be cut on the fold line (diagram 2). To find where the bodice center will actually be, measure the width of your zipper teeth – they can vary a bit.

2_zippers

Add about 2 mm (1/8”) to this measurement to give the opening a bit of space, then mark and cut off the same amount at the center fold line on all front pattern pieces, including the facing (diagram 3).

Now subtract the seam allowance (3/8” or 1 cm), marking the seamlines around the waistband on the front center bodice, the waistband, and the front peplum (diagram 4). Next, lay the outer front pattern pieces together so that the seam allowance is removed, measure, and extend the center front seamline of the front facing (piece 6) by this amount (diagram 5). This is also the length of the zipper you’ll need, though make sure you remove the neckline seam allowance and the hem allowance from your final zipper length measurement.

Finally, tape a long piece of paper to the facing, and extend the inner edge of the front facing down to its new bottom, creating a strip of about 2.5” or 6 cm, and draw a nice smooth curve to join the strip to the original facing (diagram 6). Tape some more paper to the center edge of the front center piece, the waistband piece, and the peplum, and add a seam allowance of 3/8” or 1cm (diagram 7). Cut off the excess paper (diagram 8) and your new front pieces are now ready.

2. Sewing the top

To sew the new top, we’ll change up the order of sewing from the instructions just a tiny bit. First, sew the entire bodice, minus the facings – just the front and back bodice, waistbands, peplum. At this point (and here we deviate from the original instructions), also sew the side seams. We’re doing this so that the ribbon can be attached in a continuous piece in just a little bit.

3_blouse_outer

Then, add a thin strip of interfacing to the center front opening on both sides (you can see that I used leftover pretty fabric as a kind of interlining for pattern pieces that otherwise needed interfacing).

4_interfacing_strips

Next, attach the ribbon to the waistband. Sew a line of topstitching using a thread that matches the color of the zipper. To be on the safe side, make sure the ribbon has extra seam allowance at either edge, and finish its edges before attaching to the waistband.

5_ribbon_bodice

Sew carefully along both edges of the ribbon. Change the thread to a color that matches the ribbon.

6_sewing_ribbon

Now it’s time to attach the zipper. To make sure the zipper is in the right position, line up the bottom end of the zipper teeth is with the edge of the hemline allowance first.

7_zipper_position_bottom

This way, in case the zipper is slightly too long, you can shorten it at the top. The correct length of the zipper should put the top of the zipper teeth right at the edge of the neckline seam allowance.

8_zipper_position_top

Start sewing a bit below the top of the zipper opening, to avoid the zipper pull, and attach zipper to both sides.

9_zipper_attached1

Finish by opening the zipper pull and stitch the top of the zipper the rest of the way to the bodice.

10_zipper_attached2

Next, stitch the shoulder and side seams of the front and back facings, and finish the outer edge of the facing. To attach the bodice to the facing along the zipper, first open the zipper all the way. Then, with the zipper teeth facing inward, match up the shoulder seams, corners, and so on, and sandwich the zipper between the facing and the bodice.

11_zipper_sandwiched

Stitch facing to bodice. I like to begin stitching at the center neckline, and along one side, then go back to the center neckline and stitch down along the other side. Make sure to avoid the top zipper opening and the metallic bits, stopping your stitching right before you get to that area, and either leaving it open for later handstitching or handcranking the sewing machine carefully over it to avoid breaking your needle.

12_zipper_top_facing1

Carefully position the needle on the edge of the zipper and stitch along the edge.

13_zipper_top_facing2

When sewing the side with the zipper pull, position the zipper pull all the way to the bottom to make sure you don’t accidentally stitch over it.

14_zipper_bottom_facing1

Then pull the zipper pull past where you’re stitching, and stitch all the way down the edge. 15_zipper_bottom_facing2 Stitch the bottom edge of the facing to the hem, stopping your stitching before you get to the zipper teeth.

16_zipper_bottom_facing3

Repeat with the other side of the zipper, lining up the waistband carefully. When done, clip corners of facing.

17_facing_corners

Handstitch corners closed that we left open to avoid breaking the sewing machine needle.

18_facing_corners_stitching

Turn facing to the inside and blouse right side out, and press. The zipper is done!

19_zipper_finished

All you’ve got left to do is attach and finish the sleeves, hem the blouse, and you’ve got yourself a folksy-yet-zippy little top!

20_finished_blouse

I bet you’ll get tons of compliments on it. Just that fancy ribbon alone!

RibbonZipperOlive1

What do you think? I’m definitely putting a zipper down the front in my next Olive. I never even though of it but it looks awesome! I’m so glad Kati did this tutorial and put the idea in my head. More SIM posts are on their way this month so keep watching. Also, don’t forget, for the month of September, all PDF patterns are 40% off with the code SIM40OFF! This way you can grab a pattern and sew it up to enter the SIM contests and win prizes. I can’t wait to see what you all make!

amity bow | Lolita Patterns