At Lolita Patterns we are truly Sew Grateful! We have a giveaway going on so please, if you haven’t entered, check it out. As Amity was talking about in her Sew Grateful post, we’ve seen a wonderful response to the release of our Spearmint coat pattern. I do go on about how straightforward the construction is on this coat. Today I’m going to show you how to bag the lining and what I’m going to do is make it so you can apply it to bagging any coat lining. There will be a couple of things you have to mark on your pattern that are already marked on the Spearmint pattern but don’t worry, we’ll try to make it as clear as possible.
If you’d like to buy the Spearmint coat, feel free to visit the Lolita shop– it’s open whenever you need it! There you can get a PDF version, a paper copy and you can also pick up hair canvas for the flounce collar at a very reasonable price!
A couple of things to keep in mind are that the Spearmint coat lining is cut from different lining pieces. So, if your coat doesn’t have separate lining pieces, you’ll need to alter your pattern for this tutorial to work for your coat. You’ll need it to be several inches shorter than the fashion layer, for starters. That said, the facings of both layers will match so already you can see that the changes aren’t that many.
If you are not using the Spearmint pattern, make sure you stop sewing about 3″ from the bottom where your lining matches your front facing. Leave this open. You will also want to leave about a 10 inch opening in the sleeve seam of your lining for turning later- already explained in the Spearmint instructions.
You will also need to mark your pattern pieces with the all important star/dot that will show you where to start and stop your stitching. To mark your pattern pieces, you will need both the front coat piece and the front facing piece.
– On the facing pattern piece, make sure to mark the star 3/8″ (or 5/8″ if your pattern uses 5/8″ seam allowances) from the edge and 3/8″ (or 5/8″) from the bottom.
– Layer the facing piece on top of the coat front piece, aligning them as shown in the drawing, and transfer the star marking from the facing piece to the coat front exactly where it lines up.
– Mark this star on each fabric respective fabric piece when cutting out.
Now begin sewing!
Put your coat and lining right sides together, matching facing edges and collar edges. On your Spearmint coat, you’ll stitch from the star to the edge, up the side, around the entire collar, and down the other side to the star.
If you are using another pattern, start stitching at your star/dot, along the bottom edge, up the outside edge of facing, around the top and down the other side and bottom finishing at the other star/dot. You can see the stitching line drawn in the photo below.
You should have part of your lining hanging free. This is where you did not stitch all the way down when you stitched the lining to the front facing. This is part of what helps bag your lining completely by machine.
Next, you’ll mark double the hem allowance all around your fashion fabric so you can press up the hem.
Fold up a your hem ( 2″ if using Spearmint) to create the press line. Trim seams within the hem allowance to prevent bulk. Take care to measure very carefully. Once you’ve turned your coat right side out and stitched it closed, there’s no way to even out the hem.
At this point, if you are not using Spearmint, check to see how long your lining pieces are. The perfect length would be if the lining pieces fell exactly at the fold line of the hem. If they are longer, you can trim them now. If you are using the Spearmint pattern, this has already been taken into account and the lining will fit perfectly.
Unfold the hem now and match the lining bottom to the bottom of the coat with right sides together, stitch the length of them hem with a 1/4″ seam allowance.
There will be a little gap. We’ll address that in a minute.
Clip the fashion fabric ONLY (not facing) diagonally from the edge to the star/dot as shown in the photo below.
Fold up the coat hem. Press lining down into the folded hem. You’ll want to find where the lining wants to fold naturally. Make sure you get a nice crease.
Fold the facing back under the garment so it’s out of the way and stitch from the dot down through the star, all the way to the edge and backstitch. The next three photos show you how to grab the fabric to do this step.
The biggest thing about this step is making sure you get all the thicknesses into your stitching. You also want to make sure that you don’t get a pucker in your fashion fabric. All you have to make sure to do is keep everything as flat as you can. To make this next part simpler, you can mark the stitching line as shown in the photo and then just sew on your marked line.
Stitch from where you stopped stitching the facing and lining together, all the way to the bottom on the stitching line you marked. This will complete the gap you left open at the bottom when stitching the lining and facing together.
Trim your corners. Seam allowances on the edge of the facing should be pressed toward the lining.
Turn the coat right side out, slowly, through the opening you left in the sleeve lining. Go slow and you’ll be fine.
And there you can see a perfect jump hem sewn completely by machine!!
Complete the lining instructions for closing up the sleeves as described in the Spearmint instructions. Because this part is slightly confusing, we will be posting a video showing exactly how to hem your sleeves by machine as well! Yay for no slipstitching!
Edited to update: The video on how to hem your sleeves by machine can be found over on the Three Dresses blog now!
Thank you for joining us as we say thank you in our special way with this bagged lining tutorial! Have a great day and let us know if this has helped you!